Bơm do Alphacool sản xuất tại Đức, dựa trên công nghệ của bơm Laing D5 với nhiều cải tiến cho hiệu suất bơm cao hơn, tới 1500l/h, so với Laing D5 là 1200l/h. Sản xuất trực tiếp tại Đức với nhiều tiêu chuẩn khắt khe hơn, độ bền và độ ổn định đảm bảo cao hơn.

Sản phẩm được phân phối độc quyền chính hãng tại Việt Nam bởi công ty Khởi Điểm với chế độ BH 1 đổi 1 trong 2 năm.

Alphacool TPP644 - T12 bao gồm thân bơm và đế, với tốc độ fixed speed 1500l/h. Sử dụng trực tiếp được với các loại tube 1/2" . Nếu muốn sử dụng fitting thì cần phải mod đầu fitting.

Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.

This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.
The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.

The special feature of this model is the integrated 1/2“ hose connector for tubing with an inner diameter of 13mm. This pump also has no integrated speed adjustment, why pay for the feature if it is not needed?

Technical specifications:
Dimensions (WxHxD): 90x90x90mm (without connectors)
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Pressure head at 12V: 3,7m
Maximum flow: 1500l/h
Pumped media: Water, water/glycol mixtures
Maximum system temperature: 60°C
Connectors: 2x G1/2“ barbed fittings
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Power connector: 4 Pin Molex

Extent of delivery:
1x Alphacool TPP644 - T12 (1/2" barbed fittings)

Attention: Pump control trough Heatmaster possible now!

Notice: Alphacool pump adapter cable (article number 25066) is required, to control your pump through Heatmaster.

Bơm do Alphacool sản xuất tại Đức, dựa trên công nghệ của bơm Laing D5 với nhiều cải tiến cho hiệu suất bơm cao hơn, tới 1500l/h, so với Laing D5 là 1200l/h. Sản xuất trực tiếp tại Đức với nhiều tiêu chuẩn khắt khe hơn, độ bền và độ ổn định đảm bảo cao hơn.

Sản phẩm được phân phối độc quyền chính hãng tại Việt Nam bởi công ty Khởi Điểm với chế độ BH 1 đổi 1 trong 2 năm.

Alphacool TPP644 - T12 bao gồm thân bơm và đế, với tốc độ fixed speed 1500l/h. Sử dụng trực tiếp được với các loại tube 1/2" . Nếu muốn sử dụng fitting thì cần phải mod đầu fitting.

Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.

This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.
The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.

The special feature of this model is the integrated 1/2“ hose connector for tubing with an inner diameter of 13mm. This pump also has no integrated speed adjustment, why pay for the feature if it is not needed?

Technical specifications:
Dimensions (WxHxD): 90x90x90mm (without connectors)
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Pressure head at 12V: 3,7m
Maximum flow: 1500l/h
Pumped media: Water, water/glycol mixtures
Maximum system temperature: 60°C
Connectors: 2x G1/2“ barbed fittings
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Power connector: 4 Pin Molex

Extent of delivery:
1x Alphacool TPP644 - T12 (1/2" barbed fittings)

Attention: Pump control trough Heatmaster possible now!

Notice: Alphacool pump adapter cable (article number 25066) is required, to control your pump through Heatmaster.